Frame for wall boxes. The inserts from Ave and ROHDE + ROHDE are used for installation in AVE mounting frames. The AVE mounting frames are then placed in the wall boxes.Size: ASuitable for wall boxes mentioned below: Round with diameter: 60 mm. Stone wall box with the possibility of screwing.Suitable for distance between wall boxes (center to center):71 mm center distance, connectable.

Schuko Steckdoseneinsatz mit erhöhtem Berührungsschutz (Kindersicherung). 2-polig, 16A 250V, mit Verbindungsklemmen nach VDE 0620.

The modern Schuko socket outlets are manufactured by a renowned, internationally active company near Venice and comply with EU-wide regulations. Through many years of daily use, they have proven themselves and are very popular with private customers as well as in first-class 5-star hotels. The high level of customer satisfaction is testimony to the quality of this product.For front panels and frames with square socket cut-out.Matt high-quality plasticSchuko socket insert type F (e.g. for Germany, Austria, Netherlands, Spain and many other countries)2P+E, 16A, 250VInvisible increased contact protectionSuitable for wall boxes ø 60 mm with min. 45 mm depthFixation in the wall box with screwsFixing the cables with screws

Toggle switch mechanism as a button. VDE-tested. 230V, 10A. Switch position centered, to be pressed down or up. Returns to the middle position on its own. To be used as a push button.Manufacturer: Apem.Suitable for integration in CJC front panels.________________Click here for the "NINA" switch series from CJC Systems:Retro switch-230V-NINA. CJC

Rahmen aus KuststoffMade in Italy.

Schuko Socket Insert JUNG A 1520 WW in alpine white. - Proven product, high-quality craftsmanship. - 16 A 250 V. - Easy cable fixation with spring clamps for rigid and untreated flexible conductors up to 2.5 mm thickness. - Easy installation in wall boxes with fastening claws / expansion clips. Tip: Experience the new invisible sockets from the PURIST Collection by ROHDE+ROHDE. The innovative design solution for beautiful living. Now available here in the shop. This is the most common type of socket outlet in Europe. It is used in the following countries (sorted alphabetically): Germany, Finland, Greece, Iceland, Croatia, Latvia, Lithuania, Luxembourg, Netherlands, Norway, Austria, Portugal, Sweden, Serbia, Slovenia, Spain, Hungary. Scope of delivery: JUNG Socket A 1520 WW

The modern Schuko socket outlets are manufactured by a renowned, internationally active company near Venice and comply with EU-wide regulations. Through many years of daily use, they have proven themselves and are very popular with private customers as well as in first-class 5-star hotels. The high level of customer satisfaction is testimony to the quality of this product.For front panels and frames with square socket cut-out.Glossy high-quality plasticSchuko socket insert type F (e.g. for Germany, Austria, Netherlands, Spain and many other countries)2P+E, 16A, 250VInvisible increased contact protectionSuitable for wall boxes ø 60 mm with min. 45 mm depthFixation in the wall box with screwsFixing the cables with screws

Ring - surround for round sockets

The attractive socket inserts are framed with an elegant, round decorative ring and harmonise perfectly with the retro light switches by ROHDE+ROHDE. These Schuko socket outlets are manufactured by a renowned, internationally active company near Venice and comply with EU-wide regulations. Through many years of daily use, they have proven themselves and are very popular with private customers as well as in first-class 5-star hotels. The high level of customer satisfaction is testimony to the quality of this product.For front panels and frames with round socket cut-out.Glossy high-quality plasticSchuko socket insert type F (e.g. for Germany, Austria, Netherlands, Spain and many other countries)2P+E, 16A, 250VInvisible increased contact protectionSuitable for wall boxes ø 60 mm with min. 45 mm depthFixation in the wall box with screwsFixing the cables with screws

Rahmen aus KuststoffMade in Italy.

Schuko socket outlet insert. Porcelain and high quality plastic, white. 2 P-16A 250V. For mounting in standard wall sockets with screws. 

Individual design and high-quality mechanics characterise retro switches from the Cambridge collection. Toggle switches not only look good, they are also practical and functional in operation. Thanks to their timeless design, ROHDE+ROHDE toggle light switches are suitable for classic interiors as well as for modern interior design.The mechanism is manufactured by a traditional international company near Venice and complies with EU regulations. Made in EU.Guarantee: 5 years (see guarantee declaration).Technology that has been tried and tested thousands of times and for years.Installation / Technology:Installation in standard round flush-mounted boxes ø 60 mm or cavity wall boxes ø 68 mm.Required depth of the wall box: At least 45 mm.Toggle switch mechanism with toggle lever. 10A, 250V.Function: Latching up (on) and latching down (off). For each wall box, 1 toggle switch can be placed in the middle or 2 toggle switches can be placed next to each other.Rocker switches with different functions can be combined individually in a common front panel.Installation Retro inserts:For installation in an AVE mounting frame (automatically supplied when the Cambridge front panel is ordered). Scope of delivery:  Mechanism with toggle lever.5 year warranty - WARRANTY STATEMENT:ROHDE+ROHDE provides a 5-year guarantee from the date of purchase. Within the warranty period, we will exchange the defective product for a faultless product, provided there is a material or manufacturing defect. A prerequisite for the granting of the guarantee is the presentation of a proof of purchase. This guarantee only applies to customers domiciled in the European Union. If, contrary to expectations, a defect is found, please send the faulty item, a copy of the purchase receipt, a brief description of the fault and your address to ROHDE+ROHDE®. The guarantor is ROHDE+ROHDE UG (haftungsbeschränkt) & Co. KG, David-Gilly-Strasse 1, D-14469 Potsdam. Excluded from the guarantee are in particular: Malfunctions due to incorrect connection, overvoltage in the power supply system, incorrect handling during installation, temperatures or air humidity untypical of the living space. Also excluded from the warranty are signs of use such as scratches or cracks, damage due to external influences such as bending, falling, excessive heat, mechanical action or the use of cleaning agents. Only water without any other additives and a soft cloth may be used to clean the front panels and frames. In addition, you have the rights under the statutory liability for defects as a consumer. These rights can be asserted against us without restriction and independently of our guarantee.

The modern Schuko socket outlets are manufactured by a renowned, internationally active company near Venice and comply with EU-wide regulations. Through many years of daily use, they have proven themselves and are very popular with private customers as well as in first-class 5-star hotels. The high level of customer satisfaction is testimony to the quality of this product.For front panels and frames with square socket cut-out.Glossy high-quality plasticSchuko socket insert type F (e.g. for Germany, Austria, Netherlands, Spain and many other countries)2P+E, 16A, 250VInvisible increased contact protectionSuitable for wall boxes ø 60 mm with min. 45 mm depthFixation in the wall box with screwsFixing the cables with screws

Individual design and high-quality mechanics characterise retro switches from the Cambridge collection. Toggle switches not only look good, they are also practical and functional in operation. Thanks to their timeless design, ROHDE+ROHDE toggle light switches are suitable for classic interiors as well as for modern interior design.The mechanism is manufactured by a traditional international company near Venice and complies with EU regulations. Made in EU.Guarantee: 5 years (see guarantee declaration).Technology that has been tried and tested thousands of times and for years.Installation / Technology:Installation in standard round flush-mounted boxes ø 60 mm or cavity wall boxes ø 68 mm.Required depth of the wall box: At least 45 mm.Toggle switch mechanism with toggle lever. 10A, 250V.Function: Latching up (on) and latching down (off). For each wall box, 1 toggle switch can be placed in the middle or 2 toggle switches can be placed next to each other.Rocker switches with different functions can be combined individually in a common front panel.Installation Retro inserts:For installation in an AVE mounting frame (automatically supplied when the Cambridge front panel is ordered). Scope of delivery:  Mechanism with toggle lever.5 year warranty - WARRANTY STATEMENT:ROHDE+ROHDE provides a 5-year guarantee from the date of purchase. Within the warranty period, we will exchange the defective product for a faultless product, provided there is a material or manufacturing defect. A prerequisite for the granting of the guarantee is the presentation of a proof of purchase. This guarantee only applies to customers domiciled in the European Union. If, contrary to expectations, a defect is found, please send the faulty item, a copy of the purchase receipt, a brief description of the fault and your address to ROHDE+ROHDE®. The guarantor is ROHDE+ROHDE UG (haftungsbeschränkt) & Co. KG, David-Gilly-Strasse 1, D-14469 Potsdam. Excluded from the guarantee are in particular: Malfunctions due to incorrect connection, overvoltage in the power supply system, incorrect handling during installation, temperatures or air humidity untypical of the living space. Also excluded from the warranty are signs of use such as scratches or cracks, damage due to external influences such as bending, falling, excessive heat, mechanical action or the use of cleaning agents. Only water without any other additives and a soft cloth may be used to clean the front panels and frames. In addition, you have the rights under the statutory liability for defects as a consumer. These rights can be asserted against us without restriction and independently of our guarantee.

1P 16AX 2-way switch insert with rocker (2 modules) 

Ring - surround for round sockets

1P 16AX 2-way switch insert with rocker (1 module)

High-quality white light switch frame made of authentic porcelain, masterfully crafted by the Gambarelli manufactory in Italy. This round porcelain frame is perfectly suited for use with light switch inserts, socket inserts, and accessory inserts from Gambarelli. All inserts are also available here in the assortment. Please note that, for structural reasons, the frame cannot be combined with inserts from other manufacturers than Gambarelli. The light switch frame and socket frame in porcelain are suitable for round EU wall boxes, as commonly found in countries such as Germany, Austria, France, Belgium, Luxembourg, Spain, Italy, Sweden, Denmark, the Netherlands, Norway, Finland, and others. With a thickness of only about 9 mm, this frame is flat and particularly elegant. Its outer diameter is approximately 105 mm, and the round cutout has a diameter of about 52 mm. Experience the highest quality and timeless elegance with porcelain frames from Gambarelli, meeting the most discerning aesthetic standards. For light switches, sockets, and accessories.

Product Information:Toggle switch front panel made of metal for toggle lever inserts from CJC Systems.NINA carre collection. Made by CJC Systems in Belgium. High-quality workmanship, straightforward modern design. For installation in normal round wall boxes using screws.Note: Exclusion of withdrawal (not valid for material: aluminum CJC products)This article is made by the company CJC-Systems individually according to customer-specific order. The right of withdrawal does not apply to distance contracts for the delivery of goods that are made to customer specifications or that are clearly tailored to personal needs. Returns or exchanges of this article are therefore excluded.__________________________Here it goes back to the switch series "NINA" from CJC Systems:NINA switch 230V. CJCClick here for the "NINA-KNX" switch series from CJC Systems:NINA-KNX-Schalter. CJC

Discover the elegance of invisible design sockets from the PURE collection. This frame set for 2 invisible sockets is an innovation you will love. With a removable cover, the connections remain elegantly hidden. The integrated magnets ensure easy handling and perfect alignment of the removable cover.Versatile use. Perfect for kitchens and living areas that value a stylish ambiance. Dimensions 156 x 85 x 11 mm. Install them either horizontally or vertically. Installation in 2 wall boxes, where the sockets must be mounted with a standard distance of 71 mm (center to center).Effortless installation. Also perfectly suitable for kitchen backsplashes. Dishwasher-safe cover and frame. High-quality, shatterproof plastic with a silky gloss surface. A quality product from Germany.Your perfect complement: ROHDE+ROHDE invisible sockets in alpine white from the PURIST collection harmonize ideally with JUNG Serie A alpine white.Order now: Frame sets for invisible sockets, matching socket inserts, and switch inserts in alpine white.Included in the delivery: 1 socket frame 2-fold with integrated magnets. 1 removable full-surface cover with magnets. Installation guide.

High-quality touch sensor 230V, touch-controlled light switch. Allows easy replacement with conventional 230V rocker switches. Integrated relay. For switching on and off all light sources / consumers such as LEDs, transformers, halogen lamps, energy-saving lamps, incandescent bulbs, etc.  The device remains invisible behind the touch screen and reacts to the approach of the finger (please order touch screen separately). Made in EU.Guarantee: 5 years (see guarantee declaration).VDE certified.Technology that has been tried and tested thousands of times and for years.Installation / Technology:Installation in standard round flush-mounted boxes ø 60 mm or cavity wall boxes ø 68 mm.Required depth of the wall box: At least 45 mm.3-cable connection: Neutral conductor is required.Max 6A. Integrated LED, blue steady light. Very low self-consumption in standby mode: 24 mA @ 230Vac (0.6 W).The integrated relay can be switched off, which turns the switch into a impulse push-button (see 2-way circuit / 3-way circuit).230V input and output voltage. For each wall box, 1 touch sensor can be placed in the middle or 2 touch sensors can be placed next to each other.Touch sensors with different functions can be individually combined in a common touch panel.Functionality: A short tap switches the light on or off. 2-way circuit / 3-way circuit: Example of 2-way switching: A ceiling lamp can be switched by 2 spatially separated switches.Example of 3-way / multi-way switching: A ceiling lamp can be switched by 3 or more spatially separated switches.1 touch switch (only 1 unit) is connected to any number of push-buttons. Each connected push-button thus becomes an "extension switch" and in turn behaves like the touch switch.The following can be used as push-buttons:This touch switch, switched to push-button operation by deactivating the integrated relay. Product no. 01.99.04.010Touch button 230V. Product no. 01.99.04.011Any push-button of mechanical designImportant: Please note that a push-button is not a switch. A push-button in the electronic sense only emits a current pulse.5 year warranty - WARRANTY STATEMENT:ROHDE+ROHDE provides a 5-year guarantee from the date of purchase. Within the warranty period, we will exchange the defective product for a faultless product, provided there is a material or manufacturing defect. A prerequisite for the granting of the guarantee is the presentation of a proof of purchase. This guarantee only applies to customers domiciled in the European Union. If, contrary to expectations, a defect is found, please send the faulty item, a copy of the purchase receipt, a brief description of the fault and your address to ROHDE+ROHDE®. The guarantor is ROHDE+ROHDE UG (haftungsbeschränkt) & Co. KG, David-Gilly-Strasse 1, D-14469 Potsdam. Excluded from the guarantee are in particular: Malfunctions due to incorrect connection, overvoltage in the power supply system, incorrect handling during installation, temperatures or air humidity untypical of the living space. Also excluded from the warranty are signs of use such as scratches or cracks, damage due to external influences such as bending, falling, excessive heat, mechanical action or the use of cleaning agents. Only water without any other additives and a soft cloth may be used to clean the front panels and frames. In addition, you have the rights under the statutory liability for defects as a consumer. These rights can be asserted against us without restriction and independently of our guarantee.

Toggle switch mechanism VDE-tested.230V, 10A. Switch position latching up and down. To be used as an on / off and as a toggle switch.Manufacturer: Apem.Suitable for integration in CJC front panels.________________Click here for the "NINA" switch series from CJC Systems:Retro switch-230V-NINA. CJC

Schuko Steckdoseneinsatz mit erhöhtem Berührungsschutz (Kindersicherung). 2-polig, 16A 250V, mit Verbindungsklemmen nach VDE 0620.

Mechanical blind switch with intuitive operation:Button Up opens the blind.Push-button DOWN closes the blinds.STOP is possible at any time. A narrow roller shutter switch contains all 3 functions UP - STOP - DOWN. The pressed button latches until the other button is pressed.For use in frames (socket frames with square cut-out) from ROHDE+ROHDE or from AVE.Made in EU.Guarantee: 5 years (see guarantee declaration).Technology that has been tried and tested thousands of times and for years.Installation / Technology:Narrow design (half socket width). Can be optionally installed in a wall socket:This unit + gap filler.2 pieces of these units next to each other.This unit and another narrow unit side by side.Installation in standard round flush-mounted boxes ø 60 mm or cavity wall boxes ø 68 mm.2P, 10 A, 230 V. Latching buttons, mutually locking.5 year warranty - WARRANTY STATEMENT:ROHDE+ROHDE provides a 5-year guarantee from the date of purchase. Within the warranty period, we will exchange the defective product for a faultless product, provided there is a material or manufacturing defect. A prerequisite for the granting of the guarantee is the presentation of a proof of purchase. This guarantee only applies to customers domiciled in the European Union. If, contrary to expectations, a defect is found, please send the faulty item, a copy of the purchase receipt, a brief description of the fault and your address to ROHDE+ROHDE®. The guarantor is ROHDE+ROHDE UG (haftungsbeschränkt) & Co. KG, David-Gilly-Strasse 1, D-14469 Potsdam. Excluded from the guarantee are in particular: Malfunctions due to incorrect connection, overvoltage in the power supply system, incorrect handling during installation, temperatures or air humidity untypical of the living space. Also excluded from the warranty are signs of use such as scratches or cracks, damage due to external influences such as bending, falling, excessive heat, mechanical action or the use of cleaning agents. Only water without any other additives and a soft cloth may be used to clean the front panels and frames. In addition, you have the rights under the statutory liability for defects as a consumer. These rights can be asserted against us without restriction and independently of our guarantee.

Product Information:Metal frame for use in PEHA / CJC systems.VICTOR carre collection. Manufactured by CJC Systems in Belgium. High quality processes, straightforward modern design. For installation in normal round wall boxes using screws.Annotation:Exclusion of withdrawal (not for CJC products made of aluminum)This article is requested by the company CJC-Systems according to customer-specific handicapped guidelines. The right of revocation does not apply to distance contracts for the delivery of goods that are requested according to customer specifications or are given on their own. Returns or exchanges of this article are therefore closed.

Individual design and high-quality mechanics characterise retro push-buttons from the Cambridge collection. Toggle switches not only look good, they are also practical and functional to operate. Thanks to their timeless design, ROHDE+ROHDE toggle switches are suitable for classic interiors as well as for modern interior design.The mechanism is manufactured by a traditional international company near Venice and complies with EU regulations. Made in EU.Guarantee: 5 years (see guarantee declaration).Technology that has been tried and tested thousands of times and for years.Installation / Technology:Installation in standard round flush-mounted boxes ø 60 mm or cavity wall boxes ø 68 mm.Required depth of the wall box: At least 45 mm.Push-button mechanism with toggle lever. 10A, 250V.Function: Neutral position up, contact down. Resilient.For each wall box, either 1 toggle switch can be placed in the middle or 2 toggle switches can be placed next to each other.Toggle switches with different functions can be combined individually in a common front panel.Installation Retro inserts:For installation in an AVE mounting frame (automatically supplied when the Cambridge front panel is ordered). Scope of delivery:  Mechanism with toggle lever.5 year warranty - WARRANTY STATEMENT:ROHDE+ROHDE provides a 5-year guarantee from the date of purchase. Within the warranty period, we will exchange the defective product for a faultless product, provided there is a material or manufacturing defect. A prerequisite for the granting of the guarantee is the presentation of a proof of purchase. This guarantee only applies to customers domiciled in the European Union. If, contrary to expectations, a defect is found, please send the faulty item, a copy of the purchase receipt, a brief description of the fault and your address to ROHDE+ROHDE®. The guarantor is ROHDE+ROHDE UG (haftungsbeschränkt) & Co. KG, David-Gilly-Strasse 1, D-14469 Potsdam. Excluded from the guarantee are in particular: Malfunctions due to incorrect connection, overvoltage in the power supply system, incorrect handling during installation, temperatures or air humidity untypical of the living space. Also excluded from the warranty are signs of use such as scratches or cracks, damage due to external influences such as bending, falling, excessive heat, mechanical action or the use of cleaning agents. Only water without any other additives and a soft cloth may be used to clean the front panels and frames. In addition, you have the rights under the statutory liability for defects as a consumer. These rights can be asserted against us without restriction and independently of our guarantee.

Product Information:Metal frame for use in PEHA / CJC systems.VICTOR carre collection. Manufactured by CJC Systems in Belgium. High quality processes, straightforward modern design. For installation in normal round wall boxes using screws.Annotation:Exclusion of withdrawal (not for CJC products made of aluminum)This article is requested by the company CJC-Systems according to customer-specific handicapped guidelines. The right of revocation does not apply to distance contracts for the delivery of goods that are requested according to customer specifications or are given on their own. Returns or exchanges of this article are therefore closed.

Discover the perfect synthesis of modernity and tradition: light switches with toggle levers in the retro switch collection Cambridge offers exclusive design, away from the mainstream. ROHDE+ROHDE toggle switches take up old traditions and implement them in a contemporary way. They were designed for discerning customers who are looking for something special. The best thing about it? Each retro light switch can be individually designed and thus stands out from other light switches. Make a statement with ROHDE+ROHDE retro switches.Individual retro light switches:All front panels for retro light switches are made individually for each order. You can choose from different sizes and colours or contact us to discuss special requests. Due to the individual production of the retro switch front panels, the delivery time is slightly longer. Toggle light switch in 1001 colours: All front panels and frames from ROHDE+ROHDE are "back-lacquered" by hand. From the front, you see a "glass-typical" glossy and modern surface that is easy to clean. The lacquer layer remains protected on the back. (In the case of black front panels for retro light switches, we use through-dyed material to achieve an optimal look).If the retro light switches and sockets are in the same colour as your walls, the overall picture is particularly harmonious. Light switches and sockets blend discreetly into the background.  We offer coloured front panels for toggle light switches in over 1000 colours to choose from, including original Farrow & Ball or Little Greene colours as well as all RAL and NCS colours. If you have any other colour requirements, please do not hesitate to contact us.Please note that colour representations on monitors are inadequate and may deviate from the original. We therefore recommend that you use e.g. a colour fan for colour selection if necessary.High-quality light switch in retro design:All front panels of the ROHDE+ROHDE retro design light switches are manufactured in the factory in Germany. Give your home a touch of elegance with these light switches, which can also be found in luxurious 5-star hotels. Retro switch front panel material:The development team of ROHDE+ROHDE has opted for high-quality synthetic glass, which offers several convincing advantages. Retro switch front panels are thus 11 times more break-resistant than window glass, scratch-resistant and protect the coloured "rear glass lacquer" with its integrated UV filter from light-induced colour changes. The synthetic glass shows virtually no inherent colouring and has already proven itself thousands of times over to ensure that your new retro switches still look as beautiful as on the first day, even after years of use. Installation:After the retro-switch mechanism with toggle lever has been installed in the wall box, the retro-switch front panel is simply pushed on and pressed tight. A specialist is not necessary for this. The front panel is held securely to the wall by means of a latching mechanism. If necessary, it can be removed again with a moderate amount of force.Scope of delivery:Frontblende für Retro-Lichtschalter in der Größe und Farbe Ihrer WahlInstallation materialInstructionsLight switch manufacture ROHDE+ROHDE:The individual production of retro light switches takes place in the family-run light switch manufactory ROHDE+ROHDE in Potsdam near Berlin. The switch ranges from ROHDE+ROHDE are individually manufactured to order for all customers. 

Product Information:Metal frame for use in PEHA / CJC systems.VICTOR carre collection. Manufactured by CJC Systems in Belgium. High quality processes, straightforward modern design. For installation in normal round wall boxes using screws.Annotation:Exclusion of withdrawal (not for CJC products made of aluminum)This article is requested by the company CJC-Systems according to customer-specific handicapped guidelines. The right of revocation does not apply to distance contracts for the delivery of goods that are requested according to customer specifications or are given on their own. Returns or exchanges of this article are therefore closed.

Toggle switch mechanism as a button. 230V, 10A. Switch position centered, to be pressed down or up. Returns to the middle position on its own. To be used as a push button.Manufacturer: Apem.Suitable for integration in CJC front panels.Manufacturer: Apem.Suitable for integration in CJC front panels.________________Click here for the "NINA" switch series from CJC Systems:Retro switch-230V-NINA. CJC

Product Information:Metal frame for use in PEHA / CJC systems.VICTOR carre collection. Manufactured by CJC Systems in Belgium. High quality processes, straightforward modern design. For installation in normal round wall boxes using screws.Annotation:Exclusion of withdrawal (not for CJC products made of aluminum)This article is requested by the company CJC-Systems according to customer-specific handicapped guidelines. The right of revocation does not apply to distance contracts for the delivery of goods that are requested according to customer specifications or are given on their own. Returns or exchanges of this article are therefore closed.

High-quality white light switch frame made of authentic porcelain, traditionally crafted by the Gambarelli manufactory in Italy. A 2-fold frame designed for 2 technical inserts such as light switches and electrical outlets. This porcelain frame is perfectly tailored for use with light switch inserts, socket inserts, and accessory inserts from Gambarelli. All inserts are also available here in the assortment. Please note that, for structural reasons, the frame cannot be combined with inserts from manufacturers other than Gambarelli. The porcelain frame is suitable for round EU wall boxes, as commonly found in countries like Germany, Austria, France, Belgium, Luxembourg, Spain, Italy, Sweden, Denmark, the Netherlands, Norway, Finland, and others. The wall boxes must be mounted at the usual distance of 71 mm (center to center). Accordingly, the frame also has cutouts with a spacing of 71 mm. The frame is approximately 9 mm flat. The outer dimensions are approximately 177 x 94 mm. Each round cutout has a diameter of about 52 mm. Particularly practical: Each porcelain frame can be installed either horizontally or vertically. Enjoy the special quality and timeless elegance with porcelain frames for light switches, electrical outlets, and accessories. Quality and design from Italy.

Rahmen aus KuststoffMade in Italy.

High-quality rotary switch inserts made from handmade porcelain – Made in Italy. Crafted with masterful precision in the renowned porcelain factory Gambarelli near Venice. These exclusive light switches blend traditional craftsmanship, premium materials of the highest quality, and modern robust technology to accentuate the luxurious ambiance of your spaces.The elegant rotary levers, crafted from authentic metals, turn switching into a pleasure. The premium feel of the materials and the smooth technique when turning the switches convey a high level of luxury and style. The reliability and safety of the rotary switches are confirmed by the coveted VDE seal, ensuring the highest standards.Installation is straightforward in standard wall boxes. When mounting two or three rotary switches side by side/above each other, covered by a common frame, the wall boxes must adhere to the standard spacing of 71 mm (center to center).Technical specifications:IP20, 10AX, 250V CE, VDE certified Single switch and simultaneously a 2-way switchDimmer: To adjust brightness, do not choose this switch, but opt for a rotary button together with a separate dimmer. The dimmer is a standalone device and can be placed anywhere in the circuit.3-way switch: With this rotary switch, it is possible to control the lamp from one or two locations. If you want to control a lamp from three or more locations, do not choose these switches; instead, opt for rotary buttons together with a separate relay. The relay is a standalone device and can be placed anywhere in the circuit.The high-quality rotary switches are Made in Italy and meet the quality standards for the European market. Enjoy the experience of these exclusive light switches.