AVE PRESENTS "AVE TOUCH", THE INVISIBLE REVOLUTIONHigh-quality, flat touch control panel made of glass. Experience comfortable switching with a gentle fingertip without pressing: the switching process is activated just 3 mm above the surface.For installation in a wall socket using a mounting frame (please order separately).Scope of delivery:Touch panel

AVE PRESENTS "AVE TOUCH", THE INVISIBLE REVOLUTIONHigh-quality, flat touch control panel made of glass. Experience comfortable switching with a gentle fingertip without pressing: the switching process is activated just 3 mm above the surface.For installation in a wall socket using a mounting frame (please order separately).Scope of delivery:Touch panel

High-quality touch sensor 230V, touch-controlled light switch. Allows easy replacement with conventional 230V rocker switches. Integrated relay. For switching on and off all light sources / consumers such as LEDs, transformers, halogen lamps, energy-saving lamps, incandescent bulbs, etc.  The device remains invisible behind the touch screen and reacts to the approach of the finger (please order touch screen separately). Made in EU.Guarantee: 5 years (see guarantee declaration).VDE certified.Technology that has been tried and tested thousands of times and for years.Installation / Technology:Installation in standard round flush-mounted boxes ø 60 mm or cavity wall boxes ø 68 mm.Required depth of the wall box: At least 45 mm.3-cable connection: Neutral conductor is required.Max 6A. Integrated LED, blue steady light. Very low self-consumption in standby mode: 24 mA @ 230Vac (0.6 W).The integrated relay can be switched off, which turns the switch into a impulse push-button (see 2-way circuit / 3-way circuit).230V input and output voltage. For each wall box, 1 touch sensor can be placed in the middle or 2 touch sensors can be placed next to each other.Touch sensors with different functions can be individually combined in a common touch panel.Functionality: A short tap switches the light on or off. 2-way circuit / 3-way circuit: Example of 2-way switching: A ceiling lamp can be switched by 2 spatially separated switches.Example of 3-way / multi-way switching: A ceiling lamp can be switched by 3 or more spatially separated switches.1 touch switch (only 1 unit) is connected to any number of push-buttons. Each connected push-button thus becomes an "extension switch" and in turn behaves like the touch switch.The following can be used as push-buttons:This touch switch, switched to push-button operation by deactivating the integrated relay. Product no. 01.99.04.010Touch button 230V. Product no. 01.99.04.011Any push-button of mechanical designImportant: Please note that a push-button is not a switch. A push-button in the electronic sense only emits a current pulse.5 year warranty - WARRANTY STATEMENT:ROHDE+ROHDE provides a 5-year guarantee from the date of purchase. Within the warranty period, we will exchange the defective product for a faultless product, provided there is a material or manufacturing defect. A prerequisite for the granting of the guarantee is the presentation of a proof of purchase. This guarantee only applies to customers domiciled in the European Union. If, contrary to expectations, a defect is found, please send the faulty item, a copy of the purchase receipt, a brief description of the fault and your address to ROHDE+ROHDE®. The guarantor is ROHDE+ROHDE UG (haftungsbeschränkt) & Co. KG, David-Gilly-Strasse 1, D-14469 Potsdam. Excluded from the guarantee are in particular: Malfunctions due to incorrect connection, overvoltage in the power supply system, incorrect handling during installation, temperatures or air humidity untypical of the living space. Also excluded from the warranty are signs of use such as scratches or cracks, damage due to external influences such as bending, falling, excessive heat, mechanical action or the use of cleaning agents. Only water without any other additives and a soft cloth may be used to clean the front panels and frames. In addition, you have the rights under the statutory liability for defects as a consumer. These rights can be asserted against us without restriction and independently of our guarantee.

High-quality 230V touch sensor with integrated universal dimmer. Enables easy replacement with conventional 230V rocker switches.The unit remains invisible behind the touch bezel and reacts to the approach of the finger (please order touch bezel separately).Made in EU.Guarantee: 5 years (see guarantee declaration).Technology that has been tried and tested thousands of times and for years.Functionality: Short tap switches on/off, applying the last set brightness. Tapping and holding adjusts the brightness continuously from dark to light and back until released. Installation / Technology:This sensor must be installed individually in a wall box (heat generation).Installation in standard round flush-mounted boxes ø 60 mm or cavity wall boxes ø 68 mm.Required depth of the wall box: At least 45 mm.3-cable connection: Neutral conductor is required.Integrated LED, continuous blue light. Very low self-consumption in standby mode: 24 mA @ 230Vac (0.6 W).230V input and output voltage. Touch sensors with different functions can be individually combined in a common touch panel.230V input and output voltage. Phase control and phase cut dimmer. For resistive and inductive loads = dimmable LED lamps 3-160W, 3-220W incandescent lamps and halogen lamps, dimmable toroidal transformers for low-voltage halogen lamps 20-220W, dimmable electronic transformers for low-voltage halogen lamps 20-220W, dimmable CFL lamps ("energy-saving lamps") 3-220W. Max. input: 7.6 mA. Integrated LED, continuous blue light. Alternating circuit / cross circuit: Example of changeover switching: A ceiling lamp can be dimmed by 2 spatially separated switches.Example cross connection: A ceiling lamp can be dimmed by 3 or more spatially separated switches.1 touch dimmer (only 1 unit) is connected to any number of push-buttons. Each connected push-button thus becomes an "extension unit switch" and in turn behaves like the touch dimmer.The following can be used as push-buttons:Touch button 230V. Product no. 01.99.04.011Any push-button of mechanical designImportant: Please note that a push-button is not a switch. A push-button in the electronic sense only emits a current pulse.5 year warranty - WARRANTY STATEMENT:ROHDE+ROHDE provides a 5-year guarantee from the date of purchase. Within the warranty period, we will exchange the defective product for a faultless product, provided there is a material or manufacturing defect. A prerequisite for the granting of the guarantee is the presentation of a proof of purchase. This guarantee only applies to customers domiciled in the European Union. If, contrary to expectations, a defect is found, please send the faulty item, a copy of the purchase receipt, a brief description of the fault and your address to ROHDE+ROHDE®. The guarantor is ROHDE+ROHDE UG (haftungsbeschränkt) & Co. KG, David-Gilly-Strasse 1, D-14469 Potsdam. Excluded from the guarantee are in particular: Malfunctions due to incorrect connection, overvoltage in the power supply system, incorrect handling during installation, temperatures or air humidity untypical of the living space. Also excluded from the warranty are signs of use such as scratches or cracks, damage due to external influences such as bending, falling, excessive heat, mechanical action or the use of cleaning agents. Only water without any other additives and a soft cloth may be used to clean the front panels and frames. In addition, you have the rights under the statutory liability for defects as a consumer. These rights can be asserted against us without restriction and independently of our guarantee.

High quality touch sensor 230V, touch controlled push button. Enables easy replacement with conventional 230V rocker push-buttons. Made in EU.Guarantee: 5 years (see guarantee declaration).VDE certified.Technology that has been tried and tested thousands of times and for years.Examples of use:Important: Please note that a push-button is not a switch. A push-button in the electronic sense only emits a current pulse.For alternating and cross-switching with other touch sensors from ROHDE+ROHDE (switches, dimmers, roller shutter control).For controlling downstream electronics (e.g. external dimmers or relays).For integration into home automation systems.Functionality: Comparable to a bell button, the contact is only closed as long as it is touched. The sensor reacts to approach already approx. 2 mm above the front panel.Alternating circuit / cross circuit: For a toggle or cross connection, any number of push-buttons are connected to 1 piece (only 1 device) of touch switch or touch dimmer or touch shutter control. Each connected push-button then behaves like the touch switch or touch dimmer or touch shutter control. Installation/Technique:Installation in standard round flush-mounted boxes ø 60 mm or cavity wall boxes ø 68 mm.Required depth of the wall box: At least 45 mm.3-cable connection: Neutral conductor is required.Max 2A. Integrated LED, blue steady light. Very low self-consumption in standby mode: 24 mA @ 230Vac (0.6 W).230V input and output voltage. For each wall box, 1 touch sensor can be placed in the middle or 2 touch sensors can be placed next to each other.Touch sensors with different functions can be individually combined in a common touch panel.5 year warranty - WARRANTY STATEMENT:ROHDE+ROHDE provides a 5-year guarantee from the date of purchase. Within the warranty period, we will exchange the defective product for a faultless product, provided there is a material or manufacturing defect. A prerequisite for the granting of the guarantee is the presentation of a proof of purchase. This guarantee only applies to customers domiciled in the European Union. If, contrary to expectations, a defect is found, please send the faulty item, a copy of the purchase receipt, a brief description of the fault and your address to ROHDE+ROHDE®. The guarantor is ROHDE+ROHDE UG (haftungsbeschränkt) & Co. KG, David-Gilly-Strasse 1, D-14469 Potsdam. Excluded from the guarantee are in particular: Malfunctions due to incorrect connection, overvoltage in the power supply system, incorrect handling during installation, temperatures or air humidity untypical of the living space. Also excluded from the warranty are signs of use such as scratches or cracks, damage due to external influences such as bending, falling, excessive heat, mechanical action or the use of cleaning agents. Only water without any other additives and a soft cloth may be used to clean the front panels and frames. In addition, you have the rights under the statutory liability for defects as a consumer. These rights can be asserted against us without restriction and independently of our guarantee.

Touch sensor for connection to 230V. For controlling roller shutters, venetian blinds and similar with 230V electric drive. The device remains invisible behind the touch screen and reacts to the approach of the finger (please order touch screen separately). Made in EU.Warranty: 5 years (see warranty declaration).Technology that has been tried and tested thousands of times and for years.Installation / Technology:The roller shutter touch sensor contains all functions in one device:  Open - Stop - CloseInstallation in standard round flush-mounted boxes ø 60 mm or cavity wall boxes ø 68 mm.Required depth of the wall box: At least 45 mm.3-cable connection: Neutral conductor is required.2 monostable relay outputs. N0, 2A, 230V. Monostable or bistable mode selectable. For each wall box, 1 touch sensor can be placed in the middle or 2 touch sensors can be placed next to each other.The sensor reacts to approach already approx. 2 mm above the front panel.Built-in LED (permanently lit). Optionally time-controlled operation or fully manual operation.Timed:The roller shutter motor is put into operation for an individually adjustable period of time.The opening or closing process is started and stopped by briefly tapping the sensor. The process can be interrupted at any time by briefly touching the sensor again. Touching the sensor again triggers the motor operation in the opposite direction. The connected motor must have an automatic limit stop.Fully manual (push-button operation): The motor runs as long as the sensor is touched and stops when it is released. Touching the sensor again triggers motor operation in the opposite direction. The connected motor must have an automatic limit stop.5 year warranty - WARRANTY STATEMENT:ROHDE+ROHDE provides a 5-year guarantee from the date of purchase. Within the warranty period, we will exchange the defective product for a faultless product, provided there is a material or manufacturing defect. A prerequisite for the granting of the guarantee is the presentation of a proof of purchase. This guarantee only applies to customers domiciled in the European Union. If, contrary to expectations, a defect is found, please send the faulty item, a copy of the purchase receipt, a brief description of the fault and your address to ROHDE+ROHDE®. The guarantor is ROHDE+ROHDE UG (haftungsbeschränkt) & Co. KG, David-Gilly-Strasse 1, D-14469 Potsdam. Excluded from the guarantee are in particular: Malfunctions or damage due to incorrect connection, overvoltage in the power supply system, incorrect handling during installation, temperatures or humidity levels not typical for the living space. Also excluded from the warranty are signs of use such as scratches or cracks, damage due to external influences such as bending, falling, excessive heat, mechanical action or the use of cleaning agents. Only water without any other additives and a soft cloth may be used to clean the front panels and frames. In addition, you have the rights under the statutory liability for defects as a consumer. These rights can be asserted against us without restriction and independently of our guarantee.

Operation with 12-24V. Optionally to be used as on/off switch by integrated potential-free relay output (1P N0 1A 230V), or as push-button.Built-in LED (permanently lit). For alternating and cross circuits, 2 or more sensors must be connected together. Minimum installation depth approx. 28 mm. Examples of use:The 12-24V touch button can be integrated into the existing home automation system, e.g. from Loxone, innogy, mysdlink, HomeMatic, etc., by means of an interface (details subject to feasibility testing and without guarantee). Many other applications can be realised. An integrated, switchable potential-free relay also allows use as a 12-24V light switch.

Frame for wall boxes. The inserts from Ave and ROHDE + ROHDE are used for installation in AVE mounting frames. The AVE mounting frames are then placed in the wall boxes.Size: 3MSuitable for wall boxes mentioned below: 3 modules S44 and S45 oversized rectangular box screws. Fastening centers 83.5 mm. Dimensions (L H D): 112 x 74 x 52 m.

Product description:Wall socket for flush installation for masonry - screw fastening center 83.5 mm - supplied with mortar-proof cardboard, spirit level (attached to the box) and system 44. 3 modules. Frame dimensions 167x148x60.

Product description:AVE flush-mounted one-gang junction box for cavity walls and flush installation.3 module box - screw fastening center 83.5 mm - delivery with template, spirit level and system 44 3 module frame - dimensions 167x148x60mm